|
|
| ELECTROCHEMICAL ETCH |
Analog Units
| |
Electric Etcher
|
Weld Stain Removal
|
|
Digital Units
|
Digital Units
|
|
| |
Monode M-45 Dual Purpose Power Unit
AC and DC Outputs with 3-position switch. "A", "B" and "C" positions provide 1.5, 3.0, 4.5 amps. Marking current output with related
Electrolytic Stencil Cleaning current source for each position. This unit is designed for small marks or occasional marking requirements.
|
|
|
| |
Monode M-150 Dual Purpose Power Unit
AC-DC Output with 6-position switch. Settings "A" through "F" regulates the mark voltage, ranging from 5 volts progressively through 8
volts, 11 volts, 14 volts, 17 volts, to 20 volts. Electrolytic Stencil Cleaning Current is available at the Yellow Jack. When connected
to the hand-pad with wick serves as stencil cleaner on fixed stencils on Bench Fixture. The general use power unit. Ideally suited for
most marking requirements. For shallow marks (.0001) to deep etches (.003)
|
|
|
| |
Monode Model 311
Deep Etch Power Unit, Electro-Chemical Marking Solution
• Easy to Use for Hand Marking
• Surface Marking or Deep Etch
• Easy to Read Power Selector
• AC or DC Power Output
• A-F Low = 6, 8, 11, 14, 17 and 20 V
• A-F High = Power to 40 Volts
• Color Coded Cord Receptacle
|
|
|
| |
Monode 400 CC-B Solid State Power Unit
For automatic marking machines
AC-DC output with 6-position switch voltage ranging from 5v progressively thru 8v, 11v, 14, 17v,
20v. The pulsing current generated by this unit results in deeper marks and longer stencils life. It allows vapors to dissipate and
permits the resaturating of the stencil apertures with electrolyte on the off cycle, which is instantly variable by simply turning a
simple knob in the instrument panel. The range from .2 seconds to 2.4 seconds.
|
|
|
| |
Monode 510-B Solid State Controlled Etch Power Unit
6 high positions, 6 low positions. AC-DC output with 6-position switch - voltage ranging from 5v progressively thru 8v, 11v, 14v,
17v, to 20v; (on low setting). On high setting, the voltage doubles progressively to a maximum 40 volts. Can be used as a hand
marking unit or in conjunction with the AM10A Semi-Automatic.
|
|
|
| |
Monode Electric Etcher - ME600
Marks all metals. Writes like a pencil. Speed of writing and the depth of mark can be varied by three wattage settings. Ideal for all tool cribs.
|
|
|
| |
Model 550 Digital Etching Unit
Corrosion Proof Touch Pad, Programmable Etch Cycles, Operator Friendly Set-Ups, Lock out Features, Good for Deep Etch, One Year Warranty.
|
|
|
|
|
|
