Stencils & Supplies
Monode Bench Fixtures and Parts
Used for marking cylindrical parts by rolling part over the stencil located for the bench marker. It can also be utilized for positioning or repeating the legend in the same location. Can be adapted to any power supply unit.
Download PDF
Monode Tractor Fed Paper
For use on computer printers. Dot-matrix or daisy wheel. 2 1/2" or 3 3/4" wide. 20' to 600' long.
Monode Custom Die-Impressing
Monode will die-impress stencils with your trade-mark or other repetitive data on roll or flat stencils, spaced at convenient increments, to enable you to add (with typewriter or Monode Stencil Cutting Typewriter) extra information, such as part number, heat treat code, sizes, etc., as needed.
Download PDF
Monode Photo Sensitive Stencils
All Photo Sensitive Stencils are processed in our plant. The tough lacquer base of these stencils does not permit changes or additions in layout or legend after they are processed. They cannot be typed or die-impressed, this can be done only with Monode Die-Impression Stencils. Photo Stencils are available in three types.
Download PDF
Monode Hand Ground & Finger Ground
(Hand Ground or Knife Edge) Used with small and large Bench Fixtures. Finger Ground is used for speedy handling of parts when marking on Bench Fixture.
Monode Inspection Markers And Caps
Series M Marker
The rugged construction and Positive Contact, inherent in the Monode Marking Heads, enable the user to produce a great number of marks with conventional marking equipment. Monode non-metallic (and therefore non-corrosive) marking heads do not require hospital cleanliness for their successful use. Complete Monode Marker consists of Duralife Stencil to specified design, mounted on Monode Marking Head, with reservoir tube. Reservoir Tubes are available separately.
Accessories
Junction Box
Contains three sets of coded outlets to supply several holders with current from a single Monode Power source.
Female Adapters
For use with Banana plugs and holders fitted with 0.140" Male connectors.
Male Adapters
For use with Cord Sets with Female connectors and Monode Holders.
INLINE FOOT SWITCH for M-45 & M-150-C Power Units
NOT TO BE USED WITH 400-CC-B or 510-B Power Units
FS-510-B - FOOT SWITCH for 400-CC-B & 510-B Power Units
MONODE 3-WIRE CORD SET
Red, Black and Yellow Coded Banana Type terminals with one slip-on Alligator Clip.
Neutralizer and Oils
Monode APC Neutralizer
An all-purpose Neutralizer for use with all electrolytes.
Monode RV-50 Immersion Type Neutralizer Concentrate
For Working Solution dilute - 1 part Neutralizer to 15 parts water. For use with all electrolytes.
Monode No. 90C Immersion Type Neutralizer Concentrate
For Working Solution dilute - 1 part Neutralizer to 15 parts water. Makes a clear solution for use with C-10 and MSC Electrolytes.
Monode No. 15-A Neutralizer and Inhibitor
For use with all electrolytes except C-10 and MSC Series.
Monode No. 6 Rust Protective Oil
For in-plant protection of parts after marking and cleaning.
Monode M-44 Neutralizing Tissues
For cleaning parts by rubbing unused space across area of mark. Dispose when tissue is used. Packages of 200 4" x 4".
Monode Standard Electrolyte and Neutralizer Packages
(A) Quart, (B) 4 Quart, (C) 12 Quart, (D) 5 Gallon Pail. Also available in 55 gallon drums, prices on request.
Download PDF
SC Hand Marker
SC Hand Marker and Cloth Pads
1/4" x 3/4"
1/4" x 1 1/2"
1/2" x 1 1/2"
Monode Hand Marker
Marker Size
1/4" x 3/4"
1/4" x 1 1/4"
1/4" x 1 1/2"
1/2" x 1 1/2"
1/2" x 2"
5/8" x 1 1/2"
3/4" x 1 3/4"
1" x 2"
1 1/2" x 2 1/2"
Monode Insert Stencils
Designed for use on Monode Automatic Marking Machines. Stencils are reinforced with heavy frame for easy handling and inserting into marking fixtures.
Download PDF
Electrolyte
Click button below to download the chart for the recommended electrolyte for your part.
Download PDF
Stencil Cleaner Trays
MONODE STENCIL CLEANING TRAYS are connected to the Yellow Jack on Monode Power Units. They serve as reservoirs for the electrolyte. The reversed polarity current electrolytically cleans the stencil on Hand Pad or Inspection Marker.
Stencil Magic
Give New Life to Your Worn Stencils!!! Repair Damaged Stencils. Fix pin holes, leaks, and wear areas.
Download PDF
Monode MBG KIT
Monode MBG KIT Basic equipment for the Monode marking method
1. Power unit.
2. Applicator fixtures (bench fixture, hand fixture).
3. Electrolytes.
4. Stencils.
5. Neutralizer.
Download PDF