Call Us: (440) 975-8802
Portable Laser Marking Machine by Pryor
Take the mark to the part — a handheld laser built for large, heavy, or immobile components.
Fully programmable laser marking machine in a versatile, simple to use, package. Can be used on a variety of materials for precise and permanent marks.
Integrated Display Screen
The marking head features a built-in 3″ display screen, putting key information directly at the point of marking. Before each cycle, operators can use the live outline preview to align the mark accurately on the workpiece, removing guesswork and reducing the risk of misplaced marks. The screen also shows vacuum interlock status, confirming the head is correctly sealed before marking begins, along with system indicators and programme data so the operator can verify the correct job is loaded and ready to run. Having all of this information on the marking head itself means there is no need to refer back to a separate controller or laptop during the marking process, which is a practical advantage when working on large components or in awkward positions.
Interchangeable Mask System
The interchangeable mask system allows the marking head to dock securely onto components of different shapes and sizes. Each mask is designed to create a reliable vacuum seal on a specific surface geometry, ensuring that Class 1 safety is maintained regardless of the part being marked.
Available masks include:
- Flat surface mask — for plates, panels, flat faces, and machined surfaces
- Curved surface mask — for cylindrical, round, or contoured surfaces such as pipes, vessels, and castings
- End of bar mask — for marking onto the end face of round bar, square bar, or tube
- Docking mask with clamps — for applications requiring repeatable positioning, with integrated clamping to locate the head accurately on a specific feature of the component
- The ability to switch masks quickly in the field means the Portable Laser adapts to different marking tasks without additional setup time. also – here are the specs to update from our current ones – 30W Fiber Laser Source
- The standard laser source is a 30W pulsed fiber laser, providing fast marking speeds and high-contrast permanent results on a wide range of industrial metals. The fiber laser is air-cooled, requires no consumables, and is built for continuous use in industrial environments.
Marking field options: 70 x 70mm
Mark types supported: Alphanumeric characters, serial numbers, part numbers, Data Matrix codes, QR codes, barcodes, logos, and custom graphics.
Materials: Steel, stainless steel, aluminum, titanium, and a wide range of engineering alloys. For materials compatibility or application-specific queries, contact Pryor.
| Parameter | 30W Standard | 30W MOPA |
|---|---|---|
| Nominal Power | 30 ±1 W | 33 ±2 W |
| Mode of Operation | Pulse | Pulsed & Continuous |
| Polarization | Random | Random |
| Power Tunability | 10 – 100% | 10 – 100% |
| Wavelength (nm) | 1064 ±10 nm | 1060 – 1070 nm |
| Single Pulse Energy | ≤1 mJ | ≤1.1 mJ |
| Repetition Frequency | 40 – 60 kHz | 1 – 4,000 kHz |
| Pulse Width | 90 – 120 ns | 2 – 500 ns |
| Red Guide Laser | 200 – 1000 µW (Class 2) | 200 – 1000 µW (Class 2) |
| Operating Temperature | 10 to 40°C | 0 to 40°C |
| Humidity | 10 to 95% | 10 to 95% |
| Cooling Method | Air Cooling | Air Cooling |
| Bending Radius | Min. 100 mm | Min. 100 mm |
