Call Us: (440) 975-8802
Hand Markers
The right marker for every stencil size.
Monode’s core hand marker line — available in a wide range of standard sizes, or machined at custom angles and contours to reach difficult marking locations. Ideally sized larger than the image being marked but smaller than the stencil, for a clean single-pressure mark.
| Marker | Hand Marker (HM) | Solid Handle Hand (SH) | Cartridge Marker (CM) | SC Hand Markers | Rocker Markers (RP) |
|---|---|---|---|---|---|
| ¼" x ¾" (2575) | ✓ | ✓ | |||
| ¼" x 1-¼" (25125) | ✓ | ✓ | ✓ | ||
| ¼" x 1-½" (25150) | ✓ | ✓ | |||
| ½" x 1-½" (50150) | ✓ | ✓ | ✓ | ||
| ½" x 2" (50200) | ✓ | ✓ | ✓ | ✓ | |
| ⅝" x 1-½" (62150) | ✓ | ✓ | |||
| ¾" x 1-¾" (75175) | ✓ | ✓ | ✓ | ✓ | |
| 1" x 2" (1020) | ✓ | ✓ | ✓ | ||
| 1-½" x 2-½" (1525) | ✓ | ✓ | ✓ | ||
| 2" x 2" (2020) | ✓ | ||||
| 2" x 4" (2040) | ✓ |
Type Selector:
- Hand Markers (HM) — standard general-purpose hand marker
- Solid Hand Markers (SH) — solid construction variant
- Cartridge Markers (CM) — cartridge-style
- Rocker Markers (RP) — rocking-motion marking, often used for grid marking and larger stencil layouts (allows etch byproduct gases/vapor to escape for uniform contrast)
- SC Hand Markers — legacy-style, screen-style pads, easy to control
Key Features:
- Must be used with the H-100 holder (sold separately)
- Wide range of standard sizes; custom angles/contours available
- Marker sized larger than the marked image but smaller than the stencil, for clean single-application marks
Ordering Note: Use the marker type initials (HM, SH, etc.) followed by the size code (e.g., a ½” x 1½” hand marker is HM50150). Non-standard and contour markers available for quote.
Good For: General-purpose hand marking · Grid marking and larger stencil layouts (Rocker Markers) · Legacy screen-pad workflows (SC Hand Markers)
Related Products
MODSe Stencil Cutting System
The MODSe pairs a rugged pin printer with Traceable-IT-T1 E software to cut custom electrochemical etch stencils in-house — built for shops that need serialized, compliant marking without waiting on pre-made stencils.
M-550E Digital Power Unit
The digital counterpart to the M-311E — full deep-etch voltage range plus operator lockout, accessory capability, and file storage, for shops needing both marking depth and digital repeatability.
Inspection Markers and Caps
A standard line of small marking heads built for applying inspection symbols in aerospace parts marking — simple construction and a formed stencil cap make changeover quick while keeping marks uniform, even at very small sizes.